Time Synchronisation

Network Time Protocol is a hierarchical protocol and is divided into stratum which define the distance from the reference clock. A reference clock source that relays UTC (Coordinated Universal Time) time and has little or no delay is known as a stratum-0 device. Stratum-0 servers cannot be used on the network, instead, they are directly connected to computers which then operate as primary time servers.

A primary server that receives a time signal from a stratum 0 device either through the GPS network or national time and frequency transmission is known as a stratum-1 device. On a network a stratum 1 time server supplies the time to other devices on the network which are known as stratum-2 devices. These also can be used as a time source and equipment that connects to a stratum-2 device to receive it become stratum-3 and so on.

NTP can handle up to 16 different stratum levels, although the lower down the hierarchy you go the less accurate the devices become. However, to make the system more reliable, each client can receive a time source from multiple servers. Stratum 2 devices and below can also synchronise with each other. The NTP software monitors continuously the figures of stability and accuracy of all the servers and always chooses a server with the best figures.

Multiple stratum are used an in larger networks because to bombard a single stratum-1 time server with NTP requests from thousands of machines could cause it to overload or block the network itself with workstations/routers etc repeatedly waiting for their time synchronisation requests to go through.

Network Time Protocol (NTP) is one of the Internet’s oldest protocols still in use. Developed by Dr David Mills from the University of Delaware, it has been in constant use and continually updated since 1985. NTP is a protocol designed to synchronize the clocks on computers and networks across the Internet or Local or Wider Area Networks (LANs/WANS).

In a modern global economy time synchronisation is essential for carrying out time sensitive transactions such as booking an airline ticket to bidding on an Internet auction site. If clocks were not synchronised to the same time you may find your airline seat sold after you had bought it and Ebay’s administrators would not be able to discover whose bid was the latest.

NTP is a multi-tiered system, each tier being called a stratum. Servers at each tier communicate with each other (peer) and provide time to lower strata. Servers at the top stratum, stratum 1 connect to an atomic clock either over the Internet or by a radio or GPS receiver while a stratum 2 server will connect to a stratum 1.

NTP uses an algorithm (Marzullo’s algorithm) to synchronise time on a network using time scales like UTC (Coordinated Universal Time or Temps Universel Coordonné) and can support such features as leap seconds – added to compensate for the slowing of the Earth’s rotation.

NTP (version 4 being the latest) can maintain time over the public Internet to within 10 milliseconds (1/100th of a second) and can perform even better over LANs with accuracies of 200 microseconds (1/5000th of a second) under ideal conditions.

NTP time servers work within the TCP/IP suite and rely on UDP (User Datagram Protocol). A less complex form of NTP called Simple Network Time Protocol (SNTP) that does not require the storing of information about previous communications, needed by NTP, is used in some devices and applications where high accuracy timing is not as important and is also included as standard in Windows software (although more recent versions of Microsoft Windows have the full NTP installed and the source code is free and readily available on the Internet).

The NTP program (known as a daemon on UNIX and a service on Windows) runs in the background and refuses to believe the time it is told until several exchanges have taken place, each passing a set of tests. If the replies from a server satisfy these ‘protocol specifications’, the server is accepted. It usually takes about five good samples (five minutes) until a NTP server is accepted as a source for synchronisation.

Synchronisation with NTP is relatively simple, it synchronises time with reference to a reliable clock source such as an atomic clock, although these are extremely expensive and are generally only to be found in large-scale physics laboratories, however NTP can use either the Global Positioning system (GPS) network or specialist radio transmission to receive UTC time from these clocks.

A simplified version of NTP called Simple Network Time Protocol (SNTP) exists that does not require the storing of information about previous communications as required by NTP. It is used in some devices and applications where high accuracy timing is not as important and is installed on older versions of Microsoft Windows. Windows since 2000 has included the Windows Time Service (w32time.exe) which uses SNTP to synchronise the computer clock. NTP is also available on UNIX and LINUX (download via NTP.org).

Computer networking is one of the most difficult aspects of information and communications technology (ICT). The logistics of connecting terminals, routers, printers and all the other devices can leave many administrators with a constant headache.
One of the most important aspects that often gets overlooked and can have disastrous consequences is that of time synchronization.

It is imperative that all devices on a network are telling the same time as timestamps, the format a computer relays time to each other, are the only form of reference a computer can use to establish a sequence of events. If different machines on a network are telling different times then unforeseen consequences such as emails arriving before they have technically been sent and other anomalies will make the administrator’s headache even worse.

What’s more a computer network that is not synchronized is open to security threats and even fraud. Fortunately the NTP time server has been around for many years and can ease the headache of time synchronization .

NTP (Network Time Protocol) is one of the oldest protocols used by computer networks. Developed nearly three decades ago NTP is a protocol that checks the time on all devices on network and adds or subtracts enough time to ensure they are all synchronized.

NTP requires a time reference to synchronise the network’s clocks to. Whilst NTP can synchronize a network to any time an authoritative time source is obviously the best solution. UTC (Coordinated Universal Time) is a globally used timescale based on the time told by atomic clocks. As atomic clocks lose less than a second of time in over a thousand years, UTC is by far the best timing source to synchronize a network to. Not only will your network be perfectly synchronized together but also your network will be synchronized to the same time as millions of computer networks all from around the world.

A NTP server can receive a UTC time reference from several sources. The Internet is the most obvious source, however Internet timing sources are notoriously inaccurate and those that are not can be relatively useless if the distance is too far away. Also having placed your NTP server securely behind your firewall it does seem pointless to have to keep a hole open in it to allow the NTP server to poll the timing reference from across the web and leave the entire network vulnerable, particularly as NTP authentication (NTP’s own security measure) is not possible over the Internet.

There are two far more secure and accurate methods of receiving a UTC timing reference. The first is to utilise the national time and frequency transmissions that several countries broadcast from their national physics laboratories. These are usually broadcast via long wave which has an advantage of being able to be picked up inside a server room although many countries do not have such a signal.

However, many NTP servers can utilize the timing signal broadcast by the onboard atomic clocks of the GPS (Global Positioning System) satellites.  This signal is available everywhere but a GPS antenna is required that can get a clear view of the sky.

By utilizing a UTC timing source either through the GPS network of radio transmission a computer network can be synchronized to within a few milliseconds of UTC time.

Many network administrators boast that there networks are perfectly synchronised because they have an atomic clock as an NTP server. In actual fact as atomic clocks cost several millions of pounds and are quite vast in size it is doubtful the average server room contains such a timepiece.

What in fact they are referring to is that they have an NTP server that receives a timing source from an atomic clock. However, just because atomic clocks are the most accurate chronometers in the world, accurate to a few nanoseconds (billionth of a second) it doesn’t necessarily mean that a network using one as a timing source is receiving the same sort of accuracy

Atomic clocks work on the principle that certain atoms (in most atomic clocks the caesium -133 atom) oscillates at an exact frequency at certain energy levels. In the case of the caesium atom it resonates at exactly 9,192,631,770 every second.  Because of this exact resonance, atomic clocks lose less than a second in millions of years. In fact, the resonance of the caesium atom is so precise that the International System of Units has defined the second as exactly that number of oscillations of the caesium atom.

NTP servers can receive the time from an atomic clock through several sources. Obviously the Internet contains thousands of timing servers, some of which are hooked up to an atomic clock, others however, can be over ten seconds out of sync.

Furthermore, using an Internet timing source can leave a system open to abuse as the timing references cannot be authenticated. Also, the distance from a host, client and server can make dramatic differences in the accuracy.

The most accurate and effective way of receiving a timing source from an atomic clock is to use the national time and frequency broadcast that several country’s national physics laboratories transmit. Alternatively the American GPS (Global Positioning System) transmits the time from its own satellite’s atomic clocks. both methods can provide perfect synchronisation and accuracy to within a few milliseconds.

All computers are prone to drift and as accurate timing is essential for many time critical applications, Network Time Protocol has been developed to keep computers synchronized

NTP is installed on most versions of Windows (although a stripped down version called SNTP is in older versions) and Linux but regardless is open source an free to download from ntp.org.

To synchronise a network it is preferable to use a dedicated NTP server that receives a timing source from an atomic clock either from specialist national radio transmissions or the US GPS system, although Internet time references are available but some are more reliable than others (and none can be authenticated leaving a system open to attack).

NTP is hierarchical, it is arranged into stratum. Stratum 0 is a timing source (such as an atomic clock) while stratum 1 is a server connected to a stratum 0 server and a stratum 2 is a computer (or device) attached to a stratum 1 server.

There is an understanding that if using a public Internet based time server, stratum 0 servers are not used by most applications as too many requests would disable them. Instead NTP should be configured to receive a timing reference from several stratum 1 and stratum 2 servers (it is good housekeeping to use more than one as it is possible one server could go down).

The most accurate and secure way of synchronising a network is to use a dedicated NTP server. These can receive a timing reference from either the GPS network (as each GPS satellite contains an atomic clock and broadcasts the signal) or a specialist national radio transmission. Both of these signals come from a stratum 0 source and both provide accuracy to within a few milliseconds.

Network Time Protocol (NTP) has been around for nearly 25 years. It is one of the Internet’s oldest protocols and is still widely used and under constant development.

NTP was developed and designed in 1985 by Professor David Mills from the University of Delaware in the United States. Its success owes much to the fact that it was one of the first ever protocols on the Internet and was first used when the World Wide Web was in its infancy.

The importance of NTP on modern computer networks cannot be stressed highly enough, without NTP and NTP servers many of the applications and processes that we conduct over the Internet and now take for granted

Internet auction sites, email and global trading all require accurate time synchronisation. Just imagine booking an airline ticket only to discover your seat was resold after you had purchased it because the buyer had a slower clock on their computer?

Confusion and problems such as these would be commonplace without NTP and NTP servers, just think of the hysteria around the millennium bug!

NTP servers allow not only computers on a particular network to be perfectly synchronised but as most NTP servers are set to receive time from a UTC time source, computers around the entire globe can be synchronised together. UTC or Coordinated Universal Time is a global time scale based on the time told by atomic clocks.

NTP servers can receive a timing reference from the Internet, although this is fairly inaccurate, or from dedicated time and frequency radio signals or the GPS network.

Currently an NTP server receiving an authoritative timing source can provide accuracy over the Internet to within a few hundred nanoseconds (a nanosecond is 1 second every billion years.)

An NTP server (network time protocol) is a device to ensure all machines on a computer network are running the exact same time. Without an NTP server time would be inconsistent between devices which could problems for the network, seconds could be lost here or gained there which could cause major confusion as well as leaving your network vulnerable.

Time, in the form of timestamps, provides the only frame of reference between all devices on a network and the way an NTP server works is pretty straightforward. The timestamp relayed to the server is in the form of an ever increasing number that started from a set point in time, this is known as the prime epoch and for most systems this started on 1 January, 1900.

The NTP server checks the time stamp from an authoritative source, normally a UTC source (Coordinated Universal Time, a global timescale based on the time told by atomic clocks), from either the Internet, a radio transmission or via the GPS network.

The NTP server uses the timestamp to calculate if the network clocks are drifting and adds or subtracts a second to match the reference clock. The NTP server will do this at set intervals, normally every fifteen minutes to ensure perfect accuracy.

NTP is accurate to within 1/100th of a second (10 milliseconds) over the public Internet and can perform even better over LANs and WANS with accuracies of 1/5000th of a second (200 microseconds) not unheard of.

To ensure further accuracy the NTP service (or daemon on Linux) which runs in the background and does not believe the time it is told until after several exchanges and each one has passed a protocol specification (a test), the server is then considered. It usually takes about five good samples) until a NTP server is accepted as a timing source.

Time is essential for modern computer networks, as the majority of applications and processes conducted by a PC are  reliant on a timestamp, from sending an email, debugging a server to preventing fraud, therefore, accurate time and synchronisation is vital.

NTP (Network Time Protocol) is an Internet protocol designed for the synchronisation of computer networks. NTP servers are used by millions of system administrators to ensure their networks are keeping accurate time.

However, just as a computer is only as a good as the software it is running, a NTP server is only as good as the timing source it receives.

Despite the hundreds and probably thousands of possible timing references on the Internet, administrators should be aware of some of the possible pitfalls in selecting a timing reference.

A survey conducted by the Massachusetts Institute of Technology (MIT) discovered that not only were half of Internet timing sources inaccurate by over a ten seconds (a lifetime if we are attempting millisecond accuracy) but many were too far away to be provide any useful accuracy.

If an Internet timing source is to be used then not only should the accuracy of the server be checked but also the closest host should be selected to ensure the best accuracy.

Another consideration in using an Internet timing source is to be aware that they cannot be authenticated which means that your system could be vulnerable to malicious attacks and it is recommended by Microsoft and Novell that an external hardware source should be used.

The most secure and accurate method of receiving a timing source is to use a dedicated NTP server that can receive either a national time and frequency transmission (such as WWVB in the US or MSF in the UK). Alternatively a timing source can be received from the GPS network (Global Positioning System), both methods are authenticated and can provide millisecond accuracy.

NTP (Network Time Protocol) is an internet based protocol designed to synchronise the clocks on a computer network. It is the main time synchronisation software used in computer networks and is also packaged with most operating systems.

An NTP server is a dedicated device that receives a single time source then distributes it amongst all devices on a network. The protocol NTP monitors the drift of the internal clocks on a network and corrects for them.

An NTP server can receive a time source from either a national physical laboratory such as the UK’s National Physical Laboratory (NPL), however, these time signals are broadcast via long wave radio and have  finite range.

GPS NTP servers are designed to receive the time source generated by the atomic clocks onboard GPS satellites (Global Positioning System). GPS is available anywhere on the planet as a time source as long as there is a clear view of the sky.

Without correct synchronisation all sorts of potential problems can occur such as leaving a computer system vulnerable to fraud, malicious users and hackers. An unsynchronised computer network may also lose data and be difficult to audit.

A global timescale called UTC (Coordinated Universal Time) has been developed to ensure the entire world uses the same timescale. The NTP server utilise UTC ensuring the computer network is telling the same time as every other computer network.

We may think of their being only one time and therefore one timescale. Sure, we’re all aware of time zones where the clock has to be pushed back an hour but we all obey the same time surely?

Well actually we don’t. There are numerous different timescales all developed for different reasons are too numerous to mention them all but it wasn’t until the nineteenth century that the idea of a single timescale, used by everybody came into effect.

It was the advent of the railway that provoked the first national timescale in the UK (Railway time) before then people would use noon as a basis for time and set their clocks to it. It rarely mattered if your watch was five minutes faster than your neighbours but the invention of the trains and the railway timetable soon changed all that.

The railway timetable was only useful if people all used the same time scale. A train leaving at 10.am would be missed if a watch was five minutes slow so synchronisation of time became a new obsession.

Following railway time a more global timescale was developed GMT (Greenwich Meantime) which was based on the Sun’s position at noon which fell over the Greenwich Meridian line (0 degrees longitude). It was decided during a world conference in 1884 that a single world meridian should  replace the numerous one’s already in existence. London was perhaps the most successful city in the world so it was decided the best place for it.

GMT allowed the entire world to synchronise to the same time and while nations altered their clocks to adjust for time-zones their time was always based on GMT.

GMT proved a successful development and remained the world’s global timescale until the 1970’s. By then that atomic clock had been developed and it was discovered in the use of these devices that Earth’s rotation wasn’t a reliable measure to base our time on as it actually alters day by day (albeit by fractions of a second).

Because of this a new timescale was developed called UTC (Coordinated Universal Time). UTC is based on GMT but allows for the slowing of the Earth’s rotation by adding additional ‘Leap Seconds’ to ensure that Noon remains on the Greenwich Meridian.

UTC is now used all over the World and is essential for applications such as air traffic control, satellite navigation and the Internet. In fact computer networks across the globe are synchronised to UTC using NTP time servers (Network Time Protocol). UTC is governed by a constellation of atomic clocks controlled by national physics laboratories such as NIST (National Institute of Standards and Time) and the UK’s NPL.